Here is on how to use Lonsdor K518 & Toyota Lexus smart key emulator 98 SKE green.
Preface: Toyota Lexus 98 chip (SKE Green) & 94/D4 chip (SKE Black) can work now without connecting from the server.
Chip model: 98 (SKE Green)
Remote type: Specific smart card
Key embryo No. Specific smart card
Pin code requirement: Not required
Remote generation: Generate automatically when smart key programming complete.
OBD position: Under steering wheel
Smart key appearance for part of Toyota series (see below picture)
Attention:
- Newly-generated data must be written to EEPROM chip in smart immo box. Dashboard can be lit up after smart key emulator (SKE) generated.
- Bind key/generated key: Change placement of SKE to sense if failed.
- 98 card smart box is located at the back of storage box at the passenger seat.
Operational guide:
Operational process for all key lost
Please confirm whether smart key emulator (SKE) is bound to K518.
Backup EEPROM immo data ->Generate specific EEPROM data -> Dismantle smart immo box and
write new data to EEPROM -> Generate SKE ->Add / delete smart key
Backup EEPROM immo data
- This function can backup EEPROM data.
- System is receiving data, please wait patiently.
- Please input data filename and save succeed.
Function overview
Operational process
Please confirm whether smart key emulator (SKE) is bound to K518 device beforehand.
Backup EEPROM immo data ->Generate specific EEPROM data -> Dismantle smart immo box and
write new data to EEPROM -> Generate SKE ->Add / delete smart key
- Backup the original EEPROM immo data.
- Use the backup data to generate new data.
- System certify and generate new data automatically, and program SKE to become available key,
which can open dashboard. Then you can program smart keys.
- Add a smart key.
Tap Immobilization -Toyota -> Select from type -> Smart key all lost ->All key lost-> Type 2
